... conclusions. These are summarized in the next page. Commercially-available AISI 41xx low-alloy steel bar stock at 110ksi (758MPa) SMYS is susceptible to SSC cracking at or below 175°F (79°C). The minimum acceptable service temperature for such commercial high strength 41xx grades are thus well above...

... * Phone: 210-522-5194 Abstract Dry storage systems (DSSs) store spent nuclear fuel at many operating and decommissioned power reactor sites in the United States. Carbon steel, low-alloy steel, and stainless steel components are commonly used to construct DSSs. Some of the components are exposed...

...-inch Wall x 84.72# To maintain anonymity of the suppliers, these pipes are identified in this report by their hardness, rounded to the nearest point: (The order of hardness does not correlate with the above order of product sizes) 21 HRC 23 HRC 26 HRC 29 HRC Casing OCTG low-alloy steel...

... assessment is advisable. In the absence of creep data for the material heats in question, the assumption must be made that the creep properties are not better than the minimum provided by the appropriate database. This assumption can be overly conservative. Creep rupture strength for low-alloy steels...

... and data available in the literature. carbon steel low-alloy steel thermal embrittlement air oxidation humid air corrosion pitting corrosion microbially influenced corrosion stress corrosion cracking containers nuclear waste INTRODUCTION Near-complete containment of radionuclides within waste...

...]) low-alloy steel superheater tubing from an “A-Frame” package boiler was analyzed after a 10-month service period. While in service the tube was located in the superheater bank just downstream from the inlet supply header. Boiler feedwater was a combination of steam condensate and demineralized water...