... been produced as plate, bar, seamless tube and wire. Alloy 699 XA metal dusting creep strength ductility at room temperature V- notch impact energy welding plate bar tube wire Phase calculations were performed with JMatPro V9.0 ⁽⁵⁾ on alloy 699 XA. Figure 3 shows the phase...

...Abstract Creep strength and fracture resistance are two properties that are critical in the selection and optimization of high temperature materials. These same properties may be progressively impaired by service exposure and are, therefore, key to the assessment of remaining life of high...

... oxidation resistance corrosion under sulphate deposits creep strength INTRODUCTION Improvement of the efficiency of gas turbines typically requires increasing the high-temperature capability of the alloys used in the highly mechanically-stressed components of the high-temperature turbine section. Hence...

..., the corrosion performance of alloy 803 in oxidation, sulfidation and carburization environments are presented. Alloy 803 stress rupture strength creep strength impact strength oxidation sulfidation carburization INTRODUCTION Customer demands for tailored properties and resistance to specific process...

...Figure 1 shows a comparison of creep strength data for S35315 and other common high temperature grades. The source for these values is Ref. 1 , in which creep data for a great number of common high temperature alloys are given. Abstract A newly developed austenitic high temperature alloy, UNS...

... temperatures of operation, environmental constraints as imposed by process conditions of oxidation, sulfidation, nitridation, carburization and/or thermal cycling and cost. This paper presents data on a newly developed VDM alloy 6025HT, known as alloy 602CA which is characterized by superior creep strength up...

... to provide both a homogeneous distribution of a finely dispersed precipitation of carbides and/or carbonitrides and an optimized grain size for high temperature mechanical properties. TABLE 2 Creep strength of alloy 602 CA temperature in °C R p1 .0/10 4 Rm/10⁴ MPa...