... will share the Company’s journey toward industrial mobility, for the monitoring of corrosion control activities (such as operational pigging, corrosion coupon and corrosion inhibitor residual), by the use of smart devices. An application was developed to capture the field information in the smart device...

... further discusses each key aspect of protective coating/lining inspection parameters and its intended purpose. Corrosion Risk Coating Application Inspection INTRODUCTION A recent International Measures of Prevention, Application, and Economics of Corrosion Technologies (IMPACT) study carried out...

...environment corrosion inhibitor protection efficiency service life storage transportation application MULTIPHASE PROTECTION The typical application area for this type of protection would be the interior surfaces of an enclosure with an aqueous layer. In this case, corrosion protection...

...EXPERIMENTAL PROCEDURES Abstract In the petroleum industry, corrosion control with inhibitors is typically achieved with continuous injection or via batch application at regular intervals. Numerous variables can affect the application of a batch corrosion inhibitor. Batch inhibitors are commonly...

... for carbon steel are summarized in Table 2 . Similar experiments were carried out using stainless steel, aluminum, copper, and silver. The new corrosion protection methods have increased efficiency of corrosion protection, an extended service life, and extended range of application. Applications can include...

...slow strain rate C-ring pitting testing evaluation UNS N08825 UNS N08028 corrosion resistant alloy nickel stress corrosion cracking oil patch application sour service INTRODUCTION CRA’s have historically been screened in the selection of OCTG applications by a required minimum PREN...

... N06985 corrosion resistant alloy nickel oil patch application tubing sour service INTRODUCTION Table 1 displays the partial chemical composition of evaluated alloy G-3 heats. Material for testing came from commercially produced Oil Country Tubular Goods in the extruded, annealed and tube reduced...

... been explained. Emphasis has been laid on the dependence of the inhibitor performance on the type of the test method used for its evaluation. corrosion inhibitors structure-activity mechanism evaluation application petroleum industry sour gas refining handling CORROSION INHIBITION IN REFINING...

... lose their integrity and ultimately fail to provide the service for which they were intended. The coatings act as an isolating material between the corrosive environment and the pipeline. It is important to choose the best coating type that will have the longest useful life for the application...

... significant properties that have proven useful to the authors in signal processing and process modelling: noise tolerance and complex pattern recognition. Specifically, the authors have developed a new network learning algorithm that has resulted in the successful application of ANS’s to high speed signal...

... exposure. Although the ASTM specified 10 cycles only, the exposure was continued up to 30 cycles before terminating the tests. Resistance to Chlorides The applicable ASTM C672 was used as a guide. The minimum required surface area of specimens is 0.046 m². The FRC barrier specimens had...