Abstract
Pipe fittings such as elbows and tees are often used in oil and gas production systems and are vulnerable to erosion damage when sand production is anticipated. Annular flow and low liquid loading flows are mostly observed in multiphase gas production pipelines. Sand erosion of elbows and tees in annular flow is complicated by separation of phases including sand, droplet and sand particle entrainment in the gas core and deposition of entrained droplets and sand to the liquid film. Additionally, experiments have shown that average liquid film thickness along the outer bend of the elbow is lower than that for upward vertical flow in straight sections of pipe. The liquid film thickness in the bend can significantly affect erosion as particles that are entrained in the gas core have to penetrate through the liquid film to impact the pipe wall. In order to accurately predict erosion magnitude within pipe bends, prediction of liquid film thickness in bends is important. In this study, experimental data and CFD calculations are being used to predict annular flow characteristics and liquid film thickness. The simulation results of liquid film thickness trends are in reasonable agreement with the experimental data available in the literature. The use of predicted liquid film thicknesses in high gas superficial velocities and low liquid rates allows more accurate prediction of erosion in elbows. A comparison of predicted erosion magnitude with previously developed models for predicting erosion in annular flows and experimental data indicates that the new modifications improve the predicted erosion data.
