In oil and gas production, the operating conditions can be erosive when sand is entrained in the fluid. Sudden contraction and expansion geometries are commonly found in wellbores. Erosion prediction for these geometries is a challenging task since there is a relatively complex flow field with high turbulent kinetic energy and recirculation zones developed and the entrained particles are relatively small which can be easily affected by the flow field. Commercially available CFD codes provide a way to predict erosion for these geometries. This approach is able to predict the erosion trend but can severely over-predict the magnitude of erosion. Zhang et al.1 proposed a 2-D particle tracking method for predicting erosion for direct impingement and standard elbow geometries. With consideration of turbulence, this method performs very well for these two geometries regardless of sand size. This present work extends and improves this 2-D method to sudden contractions and expansions by incorporating more physics into the particle tracking model especially for the near wall treatment. A two-layer particle-turbulence interaction model is implemented. The turbulent core region applies a classical eddy interaction model, while the near wall region, an equivalent eddy scale is estimated to consider near wall turbulence. Results from a commercially available CFD code and the improved method are compared with experimental data. It is shown that for liquid/solid flows, the improved method performs very well in predicting erosion magnitude for sudden contraction and expansion geometries.

Subject
Erosion models, Sand, Geometry, Kinetic energy, Turbulent flow, Flow velocity, Walls, Experimental data, Contraction, Meshes, Impact velocity, Erosion, Scale
Keywords:
Erosion Prediction, Eddy Scale, Near Wall Treatment, Sudden Contraction and Expansion
© 2016 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2016
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.