About 90% of the world's bioenergy is produced by burning renewable biomass fuels. Low-cost biomass fuels such as agricultural wastes typically contain more alkali metals and chlorine than conventional fuels. Although the efficiency of a boiler’s steam cycle can be increased by raising its maximum steam temperature, alkali metals and chlorine released in biofuel boilers cause accelerated corrosion and fouling at high superheater steam temperatures. Most alloys that resist high temperature corrosion protect themselves with a surface layer of Cr2O3. However, this Cr2O3 can be fluxed away by reactions that form alkali chromates or volatilized as chromic acid. This paper reviews recent research on superheater corrosion mechanisms and superheater alloy performance in biomass boilers firing black liquor, biomass fuels, blends of biomass with fossil fuels and municipal waste.

Subject
Materials, Corrosion resistant alloys, Corrosion rate, Nickel based alloys, Tubes, Biomass, Boilers, Chlorine, Deposit corrosion, Aluminum alloys, Steam, Alloys, Chlorides
Keywords:
Corrosion, biomass, boiler, superheater, alloy selection, utility boiler, recovery boiler, renewable fuels, fireside deposits, ash
© 2012 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2012
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.