Over the years, many materials have been used in the construction of components of wet limestone flue gas desulfurization (FGD) air pollution control systems ranging from duplex and austenitic stainless steels to highly alloyed grades of nickel-base corrosion-resistant alloys. Some recently constructed systems have experienced severe corrosion problems after short term operation, in some cases in less than one year. To better understand the corrosive attack and the conditions under which various materials may be used, operating systems were examined and both laboratory and field tests were conducted. Localized corrosion of materials in operating scrubbers was detected and examined. Conditions in various areas of the absorber vessels were investigated with conditions in some zones found to be considerably more aggressive that those in others. Samples of several different grades of stainless steels and alloys were exposed in an operating scrubber vessel to determine which materials were suitable for the conditions experienced in the FGD system. While the attack of the duplex steel continued, super-austenitic stainless steel and nickel-base alloy specimens were resistant.

Subject
Acids, Weld attack, Materials, Corrosion resistant alloys, Stainless alloys, Nickel based alloys, Molybdenum alloys, Flue gas desulfurization, Walls, Superaustenitic stainless steel, Steel, Construction, Corrosion resistance
© 2011 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2011
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.