Abstract

Fiberglass composites designed for chemical process equipment are generally engineered with a corrosion barrier and a structural layer that will vary in thickness based on its intended use. This paper will focus only on the corrosion barrier, sometimes referred to as a liner, and its various types and intended uses. Three typical types of liner functionality will be covered:

  1. chemical resistance

  2. electrical conductivity

  3. abrasion resistance

Without addressing these requirements, optimization of the service life of FRP equipment will not be achieved. Furthermore, neglecting liner considerations could result in a considerable reduction in the structural integrity of the part, similar to under engineering the composite. Corrosion liner considerations are therefore very important in the design and construction of FRP equipment.

Subject
Barriers, Materials, Abrasion, Silicon carbide, Fiber reinforced plastic, Composites, Fibers, Carbon fiber, Carbon, Corrosion resistance, Polyester, Abrasion resistance, Resins
© 2003 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2003
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.