Lab or coupon testing is the initial step that often suggests furan is the correct material for a specific service. This paper will describe historical problems associated with furan equipment fabrication and outline proof tested solutions. Proof testing has two definitions in this paper; first, meaning proof by trial testing and second, the step by step procedure used by the fabricator to assure each phase of manufacture is acceptable. By detailing the proper inspection testing (proof testing) during & after fabrication of furan and finally tallying the costs of failure for each phase, short & long term savings will be shown.

Subject
Test methods, Materials, Manufacturing, Laminates, Glass, Mechanical failure, Fibers, Tensile strength, Equipment, Catalysts, Furan, Polyester, Resins
© 2001 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2001
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.