An electrochemical study on Fe-Co-B-Si amorphous electrodes has been conducted. The study was focused on determining the electrochemical impedance spectroscopy (EIS) of four different alloys of Fe-Co-B-Si in various HCl acid solutions. The A.C. impedance and the capacitance of Fe-Co-B-Si, Co-Fe-Ni-B-Si, Co-Fe-Mn-B-Si, and Co-Fe-Ni-Mo-B-Si alloys were obtained in 25, 50, 75 and 100% of HCl acid at room temperature. Electrochemical parameters, i.e., impedance, were found to vary depending on additions of the Ni, Mn, Ni-Mo to Fe-Co-B-Si alloys the acid concentration, and the nanoscopic surface rouhgness of the electrodes. Consequently, a correlation between the obtained data is established.

Subject
X-ray diffraction, Thin films, Materials, Acid concentration, Glass, Nickel based alloys, Roughness, Impedance, Metallic structures, Transformers, Metallic surfaces, Oxide surfaces, Electrical resistivity
Keywords:
metallic glasses, amophous structure, alternating current impedance, Hydrochloric acid, scanning tunneling microscopy
© 1995 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
1995
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.