Glass fiber reinforced epoxy and vinyl ester piping systems have been used for over 35 years to control corrosion problems in oil fields and chemical and industrial plants and many case histories have been reported to document the successful performances of fiberglass reinforced thermosetting plastics in a wide range of corrosive services. This information is reinforced by laboratory test data from flat laminates and pipe exposed to numerous chemicals and mixtures of chemicals, but little has been published to document the effect of long-term, in­service exposure papers on fiberglass equipment. The purpose of this paper and two previous papers on the same subject1,2  is to help to fill this void by comparing data from physical testing of pipe removed from succesful corrosive service applications with data obtained from the same type of pipe at the time of manufacture. The information supplied in these papers represents only a few of the successful applications of filament wound epoxy and vinyl ester pipe as it is difficult to obtain permission to remove pipe from an operating line.

Subject
Field performance, Test methods, Piping, Manufacturing, Walls, Stress, Mechanical failure, Pressure, Fiberglass, Oilfields, Epoxies, Fracture, Resins
© 1988 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
1988
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.