Microbial induced corrosion (MIC) relevant to nuclear power plant systems is reviewed. The long construction times associated with nuclear plants and the large number of redundant or standby systems where water is allowed to remain stagnant for long periods of time produce conditions under which MIC can occur. Carbon and low alloy steels, stainless steels, and copper alloys are all susceptible to MIC in raw water applications. Methods for diagnosis, treatment, and prevention of MIC during construction, operation, and lay-up are discussed. Visual examination is noted to be particularly useful in performing preliminary assessments of MIC.

Subject
Pits, Weld attack, Water, Materials, Nuclear power, Copper alloys, Corrosion products, Pitting, Chlorine, Deposit corrosion, Stainless steel, Microorganisms, Microbiologically influenced corrosion
© 1988 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
1988
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.