To model the corrosion behaviors of the heat transport circuits of light water reactors, a mixed potential model (MPM) has been developed and applied to both boiling water reactors (BWRs) and pressurized water reactors (PWRs). Using the data generated by the GE/UKEA-Harwell radiolysis model, electrochemical potentials (ECPs) have been calculated for the heat transport circuits of eight BWRs operating under hydrogen water chemistry (HWC). By modeling the corrosion behaviors of these reactors, the effectiveness of HWC at limiting IGSCC and IASCC can be determined. For simulating PWR primary circuits, a chemical-radiolysis model (developed by the authors) was used to generate input parameters for the MPM. Corrosion potentials of Type 304 and 316 SSs in PWR primary environments were calculated using the MPM and were found to be in good agreement with the corrosion potentials measured in the laboratory for simulated PWR primary environments.

Subject
Circuits, Intergranular stress corrosion cracking, Boiling water reactors, Hydrogen concentration, Recirculation, Reactors, Radiolysis, Feedwater, Heat, Oxygen, Mixed potential, Corrosion potential, Hydrogen
© 1994 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
1994
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.