Socket weld connections are frequently used in the petroleum and petrochemical industry for small bore carbon steel piping. These connections are allowed by piping codes such as ASME1 B31.3 (1) for process piping and are considered cost effective as they can be produced relatively quickly and they are to some extent tolerant regarding field fit up issues. The requirements for a socket weld are specified in the figures 328.5.2.A, B and C of ASME B31.3. These figures define the minimum size of the fillet weld in relation to the pipe and flange thickness and also specify a gap of approximately 1.5 mm after inserting the pipe in the socket before welding to allow for thermal expansion during welding. These socket welds are fillet welds and are normally made using the gas tungsten arc welding (GTAW) process. The objective of this paper is to explain that it is important to exercise caution in the use of socket welds in sour service process environments. This paper will explain the difficulty during socket welding in ensuring compliance to the ANSI2/NACE3 MR0103/ISO4 17945 (2) and NACE SP0472 (3) specification requirements. McDermott sets quality control requirements for socket welds to guarantee that socket welds are obtained with acceptable hardness figures that are resistant against Sulfide Stress Cracking (SSC).

Subject
Materials, Piping, Welding procedures, Welding, Hardness testing, Stress, Gas tungsten arc welding, Maximum hardness, Quality control, Deposit corrosion, Cracking, Sulfide stress cracking, Hardness
Keywords:
Sulfide Stress Cracking, SSC, Socket Welds, Hardness, Sour Service
© 2021 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2021
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.