Abstract
The effects of Al, Cr, Cu, Ni, Mo, Si and Ti additions in varying amounts to ferritic steels upon the stress corrosion cracking susceptibilities in a nitrate, a hydroxide and a carbonate- bicarbonate solution have been determined for the steels in the annealed condition. The effects of the alloying additions vary with the environment, but Cr and Ti, in sufficient amounts, most frequently produced improvements in cracking resistance in the different solutions. The influences of the various alloying additions are mostly dependent upon their effects on dissolution and passivation characteristics, although their effects upon carbon distribution in the steel and mechanical properties are also of importance.
© 1981 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
1981
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.
