..., and challenges associated with the construction of these diagrams. The key objective of this project is to pinpoint crucial thermodynamic variables that substantially affect metal corrosion electrochemistry in the context of molten salt nuclear reactor applications. ^‡ Corresponding author. E...

[email protected] . 26 August 2022 27 March 2023 27 March 2023 © 2023, AMPP 2023 corrosion mechanisms electrochemistry martensitic stainless steels molybdenum sour environment thin films O il and gas wells are highly corrosive environments because it contains hydrogen...

..., AMPP 2022 applied stress carbon dioxide-induced stress corrosion cracking electrochemistry flexible pipes protective films small scale testing F lexible pipes have been used by the oil and gas industry in offshore applications for many decades in the transportation of fluids...

... DMEM at RT, and two different flow rates (∼2 mL/min and ∼10 mL/min) were tested and compared to measurements in the flow cell under static conditions. Experimental order was the same as for the conventional electrochemical cell. Dulbecco’s Modified Eagle’s Medium (DMEM) electrochemistry...

... an intermediate state of a hydrogen atom bound to an active site (the Volmer reaction): corrosion density functional theory electrochemistry first principles hydrogen evolution reactions magnesium alloys surface chemical reactions Tafel reactions To understand the effect of impurities in Mg-X...

... author. E-mail [email protected] . ^*School of Materials Science and Engineering, Central South University, Changsha 410083, China. 26 8 2011 25 11 2011 © 2012 NACE International 2012 AP65 magnesium alloy corrosion discharge activity electrochemistry...

... links. 20 5 2010 8 9 2010 © 2011 NACE International 2011 capacitance corrosion electrochemical instruments electrochemistry polarization resistance Electrochemical data for assessing corrosion rates and for revealing fundamental aspects are usually obtained using...

... then carried out on the 22 Cr DSS and the 25 Cr SDSS at 130°C (the maximum temperature expected in service) with the goal of characterizing the corrosion potential, pitting potential, and repassivation potential. duplex stainless steel electrochemistry evaporation seawater stress corrosion cracking...

... International 2004 aluminum cerium conversion coating corrosion resistance electrochemistry scanning electronic microscopy x-ray photoelectron spectrum Aluminum and its alloys are applied extensively in modern industry, especially in the aerospace industry. But, these materials have...

... by the formation of a corrosion product film. The corrosion rate was unaffected by hydrogen pressures up to 100 atm. anaerobic corrosion electrochemistry hydrogen radioactive waste steel Sweden has 11 nuclear reactors in operation at four different sites. These reactors produce ~50% of all...

... steel in CO₂ solutions, pH 6, 60 ppm CTAB. FIGURE 9. Mild steel in CO2 solutions, pH 6, 60 ppm CTAB. FIGURE 10 Mild steel in CO₂ solutions, pH 6, 100 ppm CTAB. FIGURE 10. Mild steel in CO2 solutions, pH 6, 100 ppm CTAB. carbon dioxide corrosion electrochemistry...

...) and a takeoff angle of 90° were used for analysis with XPS. Alloy 600 Alloy 690 Auger electron spectroscopy electrochemistry lead polarization steam generator stress corrosion cracking x-ray photoelectron spectroscopy Critical current and passive current densities of Alloy 600 and Alloy...

... potential of the zirconium was reduced significantly. Based on these results, grade 705 zirconium was determined to be suitable for a wide range of P_HT process conditions. February 1998 November 1998 1 2010 NACE International 1999 bleaching electrochemistry grade 705...

... 2010 NACE International 1997 chloride concrete corrosion potential corrosion rate electrochemical testing electrochemistry guard electrode manual potential mapping polarization resistance potential potentiokinetic linear polarization resistance simulated pore solution steel...

... resistance electrochemistry microcracks microstructure nickel potentiodynamic polarization pulse plating salt-spray testing zinc The most widely used corrosion protective coating for steel is Zn, which is applied by hot-dipping or electroplating processes. For corrosion protection, the Zn...

... pool before solidification. ²⁵ Present address: Plasma Coatings Inc., 758 E. Main, Waterbury, CT, 06702. February 1995 October 1995 NACE International 1996 aluminum chromium coatings electrochemistry high-temperature corrosion hot corrosion laser glazing...

... behavior. Al 99.5 aluminum aqueous environments carbon dioxide cathodic polarization chloride solutions copper electrochemistry hydrogen sulfide immersion test microstructure pitting temperature It generally is believed that aluminum is resistant to aqueous solutions containing...

.... NACE International 1995 Al 99.5 bicarbonate brines carbon dioxide chloride solutions copper electrochemistry microstructure It has been reported that aluminum is resistant to these species in various combinations, except in the presence of heavy-metal ions such as copper. ²...

.... This corresponded to ~ 90% inhibition efficiency. anodic dissolution brine carbon dioxide carbon steel corrosion potential corrosion rate electrochemistry film formation hydrogen sulfide partial pressure Polarization plots for carbon steel at different exposure times in experiments with 0.14...

... acid (HCl) for 5 min, given a short rinse in 1% HCl, and mounted in the test cell without drying. January 1993 April 1993 NACE International 1993 carbon steel corrosion current density electrochemistry gas production passivation oil production potential Much study...