... AZ31 AZ31-0.5Ca electrochemical behavior magnesium potentiodynamic polarization R ecent years have witnessed a surge in the prominence of magnesium and its alloys, driven by their exceptional combination of high specific strength and low density. ^{1 - 2} Within this domain...

... in yielding and maximum strength, as well as the postyielding stiffness of the beams. It was found that the electrochemical behavior of the beams with corrosion was similar regardless of the tensile stress in the steel considered (40% or 80%). The measured electrochemical parameters indicated a high level...

.... The electrochemical behavior was conducted by open-circuit potential with potentiodynamic and potentiostatic polarizations. The results showed that cathodic protection potential was in the range of −0.960 V_CSE to −1.103 V_CSE. The corrosion type and consumption rate of the alloy anode were...

... 2014 5 5 2014 5 5 2014 © 2014 NACE International 2014 Al-Pb monotectic alloy corrosion electrochemical behavior microstructure solidification It is known that monotectic Al-Pb alloys are of technical importance for sliding self-lubricated bearing applications...

..., Institute of Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China. 26 9 2013 14 1 2014 14 1 2014 © 2014 NACE International 2014 absorption CrN defects diffusion electrochemical behavior growth kinetics passive film...

...I. Schoukensa; I. De Graeve; J. De Strycker; H. Terryn The goal of this article was to understand how differences in the composition and the microstructure of aluminum and aluminum-silicon coatings on steel affect the macroscopic electrochemical behavior. In particular, the focus...

... and hydrogen evolution (or oxygen reduction), on magnetite is to slow down the last part of the open circuit E_corr-t curve. National Association of Corrosion Engineers 1991 electrochemical behavior magnetite carbon steel electrode open circuit cathodic reactions The selective...

... and significantly affects the corrosion resistance of both coatings. The open-circuit potential as well as the galvanic coupling currents were also investigated for the coatings. Al-Zn coating corrosion electrochemical behavior hot dip intermetallic passivation Zn coating Zinc used...

... an intermetallic layer with iron. The formation of the intermetallic layer gives rise to stepwise profile of the Fe distribution within the coating. ¹⁴ December 1989 June 1990 National Association of Corrosion Engineers 1991 Al-Zn coating corrosion electrochemical behavior hot...

... an unusual electrochemical behavior occurred with three current reversals in commercial- and reagent-grade CMA solutions of 2 wt% and higher. A current reversal occurred, followed by a cathodic loop; then a second current reversal occurred. An anodic current loop followed this second current reversal, which...