...Zhenbo Qin; Lifang Cao; Yida Deng; Cheng Zhong; Wenbin Hu; Zhong Wu The effect of oxide film on the cavitation erosion-corrosion of nickel-aluminum bronze (NAB) alloy in 3.5 wt% NaCl solution was investigated via pulse and continuous cavitation modes of ultrasonic vibrator device according to ASTM...

... alloys vis-à-vis conventional leaded red brass using an ASTM standard cavitation test and an erosion corrosion pipe-loop method. All 12 nonleaded test alloys were more resistant to cavitation than red brass. Silicon brass C87500 had the greatest susceptibility to erosion corrosion, while stainless steel...

...H. Soyama The corrosion potential of pressure vessel steel after exposure to residual bubbles and the open-circuit potential of Pt during cavitation were measured to investigate the corrosion behavior induced by residual bubbles after cavitation bubble collapse (as distinct from erosion caused...

... resistance of the duplex stainless steel, and the EN 1.4462W is always the anodic element of the pair comprising welded and non-welded stainless steel. The corrosion behavior and the repassivation behavior of the alloys are modified by cavitation. The surface of the materials was examined to evaluate...

.... Measurements were taken with both polarization resistance and electrochemical impedance spectroscopy techniques during cavitation of carbon steel electrodes in 1 M sodium chloride (NaCl) solution saturated with carbon dioxide (CO₂) in the absence and presence of a corrosion inhibitor. Scanning...

...S.Z. Luo; Y.G. Zheng; M.C. Li; Z.M. Yao; W. Ke The cavitation corrosion behavior of 20SiMn low-alloy steel in both distilled water and 3% sodium chloride (NaCl) solution was investigated using a magnetostrictive-induced cavitation facility. The micrographs of damaged surfaces were observed...

...A.G. Petersen; D. Klenerman; W.M. Hedges; M.L. Harris Development of an ultrasound-based, bench-top test to measure the effectiveness of corrosion inhibitors when subjected to cavitating bubbles is outlined in this paper. It is proposed that the cavities produced by an ultrasonic probe have some...

.... To solve these problems, 10 copper alloys were examined using three test methods under accelerated, but well-known experimental conditions: the ISO 6509 dezincification test for pure corrosion, the vibratory cavitation test with eccentric stationary specimen for cavitation erosion-corrosion, and the jet...

...J.G. Auret; O.F.R.A. Damm; G.J. Wright; F.P.A. Robinson A vibratory-type cavitation test rig was constructed to study the effect of polarizing currents applied to a cavitating body. The generation of gas by electrolysis reduced mechanical damage suffered by a cavitating body because of bubble...

...Y. Oka; M. Ohkubo Cavitation erosion–corrosion tests by means of a magnetostriction vibratory unit were conducted on commercially pure irons in various corrosive solutions consisting of inhibitors added to a 3% sodium chloride solution. Three kinds of inhibitors were used, and the combined erosion...