...R. Case; H. Castaneda; Y. Ding; D. Narayanan; A. Khan; M. Cedeño; G. Peña The influence of the microstructure on the resistance to pitting potential in austenitic stainless steel UNS S31603 is evaluated to explain the effect of the distribution of features such as carbides. Different...

...Kangkang Zheng; Wei Dai; Donghua Suo; Zhe Fang; Yiming Jiang; Jin Li; Zhiyu Wang; Yangting Sun This article investigates the pitting resistance of a newly developed Fe-Cr-Mn-N austenitic stainless steel with 0.14 wt% carbon and its counterpart with 0.02 wt% carbon. By using especially hot-rolled...

... 2023, AMPP 2023 austenitic stainless steel marine atmospheric corrosion relative humidity stress corrosion cracking Table 1. Composition of 304 SS Used in This Study (All Values in wt%). R elative humidity (RH) plays a primary role in the kinetics of atmospheric corrosion...

... technologies that operate at elevated temperature. Creep testing was performed in argon and hydrogen gases under absolute pressure of 0.12 MPa at 873 K. The material was JIS SUS304 austenitic stainless steel. Results revealed that the creep life (time to failure) and creep ductility (strain to failure...

...Cem Örnek The atmospheric corrosion, as well as environmentally assisted cracking behavior of 316L austenitic stainless steel (UNS S31603) beneath MgCl₂ and MgCl₂:FeCl₃ droplets under elastic and elastic-plastic strain exposed for 6 months at 50°C and 30% relative...

... of austenitic stainless steel: UNS S30900, UNS S31000, and UNS S31042. The austenitic stainless steels were exposed to the temperature range of 700°C to 800°C for 3,000 h. The study performed long-term high-temperature exposures and microanalytical investigations of the oxide scale formed using scanning...

...C. Örnek; D.L. Engelberg Type 304 (UNS S30400) austenitic stainless steel was exposed for 6 months under elastic (0.1%) and elastic/plastic (0.2%) strain to MgCl₂ and mixed MgCl₂:FeCl₃ droplets with varying chloride deposition densities (1.5 μg/cm²–1,500...

... 2017 05 July 2017 © 2017, NACE International 2017 austenitic stainless steel cold work corrosion rates HCl polarization The corrosion behavior of stainless steel in HCl-containing aqueous environments has been extensively studied in the literature, with early investigations...

... 30 3 2015 © 2015 NACE International 2015 alkaline solution austenitic stainless steel selective dissolution sodium hydroxide sodium sulfide stress corrosion cracking Anodic corrosion protection is commonly used to protect digesters constructed of carbon steel and is known...

... behavior of the materials 33 35 and is widely used to evaluate the pitting corrosion behavior of austenitic stainless steel. 26 31–33 36 austenitic stainless steel cyclic potentiodynamic polarization pitting corrosion post-welding sensitization resistance spot welding...

...J. Xiao; S.Y. Qiu; Y. Chen; Q. Xu A basic problem of austenitic stainless steels applied in pressurized water reactors (PWR) is degradation by corrosion fatigue. This paper proposes a prediction model (Nuclear Power Institute of China [NPIC] model) to estimate corrosion fatigue lives of austenitic...

...]) at 75°C for 72 h. After corrosion testing, the samples were scrubbed using a nylon brush, ultrasonically cleaned, and dried with ethanol (C₂H₆O) to remove any debris from the pits. Total weight loss was used as an indicator of corrosion resistance. austenitic stainless...

... NACE International 2009 corrosion austenitic stainless steel crevice corrosion laser welding localized corrosion nitrogen molybdenum pitting In addition to UNS N08367, three other related SASS materials were also examined in the course of this research. These alternatives...

...S.-T. Kim; Y.-S. Park The effects of S addition on the corrosion behavior of Cu-containing austenitic stainless steel in 18.4 N sulfuric acid (H₂SO₄) at 80°C to 120°C were investigated using polarization testing, immersion testing, metallographic examination, x-ray...

...M. Pisarek; P. Kędzierzawski; M. Janik-Czachor; K.J. Kurzydłowski The corrosion resistance of Type 316 (UNS S31600) austenitic stainless steel in an aggressive environment containing Cl⁻ ions in the as-received state and after nanostructuralization caused by severe plastic deformation...

...S.-T. Kim; Y.-S. Park The effects of Cu addition on the corrosion behavior of austenitic stainless steel in 18.4 N sulfuric acid (H₂SO₄) at 80°C to 120°C was investigated through anodic polarization, cathodic polarization, long-term immersion, x-ray photoelectron spectroscopy...

...K. Aríoka; T. Yamada; T. Terachi; R.W. Staehle The influence of material factors on the intergranular stress corrosion cracking (IGSCC) susceptibility of austenitic stainless steels under hydrogenated high-temperature water were studied using the constant extension rate technique (CERT) using...

... austenitic stainless steel intergranular stress corrosion cracking primary water strain rate slow strain rate test stress corrosion cracking transgranular stress corrosion cracking UNS N06600 UNS S30400 UNS S31600 TABLE 1 Chemical Composition and Mechanical Properties of Test Materials...

...A. Igual Muñoz; J. García Antón; J.L. Guiñón; V. Pérez Herranz The corrosion behavior of three stainless steels UNS 14311, UNS 14429 (austenitic stainless steels [SS]), UNS 14462 (duplex SS) and their corresponding filler metals (alloys in form of wire) for welding was studied in a commercial...

... was observed after 47,713 h. ‡ Corresponding author. September 2003 January 2004 NACE International 2004 austenitic stainless steel autoclave testing boiling water reactors crack initiation crack propagation intergranular stress stress corrosion cracking uniaxial constant...