.... ^‡ Corresponding author. E-mail: [email protected] . 01 July 2019 20 October 2019 20 October 2019 © 2019, NACE International 2019 carbon steel corrosion monitoring EIS galvanized steel gel electrolyte polarization curves portable cell Up until now, liquid electrolytes...

... band formation, from strain-induced martensite to developments in dislocation substructure. Experimental observation on strain partitioning and on microstructure evolution in DSS naturally has attracted ^{1 , 21 , 28 31 - 32} academic research. anodic polarization EIS electrochemical...

... corrosion carbon steel decanethiol EIS surface film Carbon dioxide (CO₂) corrosion becomes a serious problem when, in the oil and gas industry, significant amounts of CO₂ dissolve in water, causing corrosive degradation of facilities made from carbon steel. One way...

... coupling and crevice solution chemistry changes. ^‡ Corresponding author. E-mail: [email protected] . 16 July 2018 11 February 2019 11 February 2019 © 2019, NACE International 2019 aluminum alloys 7075 and 2024 coating fatigue crevice corrosion EIS...

... on the erosion–corrosion resistance of zinc-rich epoxy coatings. In this work, electrochemical impedance spectroscopy (EIS) was applied to analyze and compare the degradation process of zinc-rich epoxy coatings with and without CNTs in a corrosive and erosive environment. The protection mechanisms...

... dependent on the kinetics of passive film growth. Long-term electrochemical measurements, including polarization resistance, open circuit potential (OCP), and electrochemical impedance spectroscopy (EIS) measurements were performed to investigate the evolution of the passive state of 304 stainless steel...

...L.G. Bland; A.D. King; N. Birbilis; J.R. Scully The corrosion of commercially pure magnesium (Mg) and AZ31B-H24 with simultaneous measurements of electrochemical impedance (EIS) and hydrogen gas evolved over a 24 h immersion period was studied in solutions of three chloride concentrations...

..., while the sample that was vertically situated had the highest, under static condition. The corrosion scales were studied by scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS), and Cu Kα x-ray diffraction (XRD). The morphology, impedance, and residual stress of the scales...

... ethylsulfate, acting as non-aqueous medium, made it possible to evaluate the protective performance of polysiloxane coating under dry conditions. EIS measurements allowed monitoring of both impedance and capacitance during outward water diffusion, and proved the waterproofing properties of the hybrid coating...

... 0.5 M NaCl solution at room temperature. Electrochemical impedance spectroscopy (EIS) plots, potentio-dynamic polarization curves, and equivalent circuits are used to evaluate the corrosion response. It was found that nano-sized Al₉FeNi intermetallic (IMC) particles have an important role...