The theory of adsorbtive inhibitors is discussed briefly. An account is given of tests by coupons and in refinery equipment evaluating the effect of three semi-polar compounds in reducing the corrosion of refinery equipment. Data on concentrations, technique of additions to streams, coincident use of ammonia, cost per barrel of charge, percentages discharged in effluent and percentage retained in stream are given. Considerable information is revealed indicating the detergent action of the inhibitors assists in reducing deposits on tubes and in pumps and other equipment and thereby extends the period between shutdowns for cleaning. Significant reductions in the corrosion rates in crude distillation units, steam reboilers, straight run deisobutanizers, vacuum pumps, alkylation units, TCC units and other refinery equipment are reported. The author concludes water soluble inhibitors tested are sufficiently soluble in hydrocarbons to provide corrosion protection.
Skip Nav Destination
Article navigation
February 1955
Research Article|
February 01 1955
Use of High Molecular Weight Corrosion Inhibitors In Petroleum Refineries⋆
H. Howard Bennett
H. Howard Bennett
H. HOWARD BENNETT—He is corrosion engineer at the Paulsboro, N. J., refinery of Socony-Vacuum Oil Co., Inc. With a degree in chemical engineering from Drexel Institute of Technology, he has worked for Socony-Vacuum in its Plant Control laboratories, Operating Department, Research and Development Laboratories and Engineering Department.
Search for other works by this author on:
Online ISSN: 1938-159X
Print ISSN: 0010-9312
Copyright 1955 by the National Association of Corrosion Engineers.
1955
CORROSION (1955) 11 (2): 19–27.
Citation
H. Howard Bennett; Use of High Molecular Weight Corrosion Inhibitors In Petroleum Refineries⋆. CORROSION 1 February 1955; 11 (2): 19–27. https://doi.org/10.5006/0010-9312-11.2.19
Download citation file: