The conditions created by the presence of corrosive compounds in crude oils, the formation of corrosive compounds during processing and by the use of corrosive process chemicals makes constant inspection of refinery equipment necessary. The refinery equipment inspector must be familiar with construction and operation so he can anticipate and forestall expensive replacements. Corrosion caused by hydrogen sulfide formed during distillation by the breakdown of sulfur compounds usually can be predicted. However, the inspector always must be alert for localized overheating which will accelerate the corrosion rate. Naphthenic acids are most corrosive at their condensation points. Their presence in the crude oil or their formation during refining may cause severe localized corrosion wherever they are condensed or evaporated. Corrosion in gasoline storage tanks caused by moisture, oxygen and slight concentrations of other gases, proceeds at a low rate as compared to corrosion in distillation equipment. Nevertheless, it is responsible for major repairs.
Skip Nav Destination
Article navigation
May 1954
Research Article|
May 01 1954
Inspection of Petroleum Refinery Equipment*
Edward H. Tandy
Edward H. Tandy
EDWARD H. TANDY—Head equipment inspector at the El Segundo refinery of Standard Oil Company of California since 1948, Mr. Tandy has been closely associated with materials, corrosion and equipment inspection problems since 1938. He attended the University of California at Los Angeles and Berkeley, majoring in mechanical engineering. He has been with Standard Oil of California since 1930.
Search for other works by this author on:
CORROSION (1954) 10 (5): 160–164.
