... that provides enhanced corrosion and mechanical properties exists and can go beyond standard performance in the market. Sustainability Scorecards provides a tool that can be used to calculate and benchmark the sustainability credentials of corrosion protection coating solutions ¹ A new generation...

.... Due to their more noble composition, these alloys have a high resistance to corrosive media, but show reduced mechanical properties when compared to steels and this backdrop can be a barrier for their usage. In these cases, Ni-based alloys can take advantage of the cold work-hardening mechanism...

... instrument were consistent with the EIS interpretation of fatigue degrading the coating barrier properties, while scanning electron microscopy (SEM) images showed an increased linear density of pretreatment cracks in the fatigued coating samples. Mechanical properties fatigue organic coatings EIS outdoor...

...Mechanical properties and microstructural characteristics of WAAM 718 Abstract Laser powder bed fusion (LPBF) is becoming a popular additive manufacturing (AM) process for oilfield components of Alloy 718. Despite attracting features, AM 718 is often uneconomical, greatly limited in size, while...

...-Enhanced Localized Plasticity (HELP) is seen to be the primary failure mechanism in martensitic steels. Cr-Ni-Mo steels martensitic steels hydrogen embrittlement mechanical properties INTRODUCTION A decarbonized energy system is underway worldwide. The Paris Agreement ¹ goal is to keep...

...Abstract This paper focuses on the detrimental effects of wildfires on steel structures within the power industry, specifically examining the degradation of mechanical properties in structural materials and protective coatings due to high-temperature exposure. It discusses the impact...

... and mechanical properties of additively manufactured 316L stainless steel material in simulated physiological environment was studied. In the efforts of improving the reliability of Additive Manufactured biomedical devices, this research focuses on studying the corrosion, microstructural and mechanical...

... Coatings Corrosion Protection Extended Service Life Mechanical Properties Crack resistance INTRODUCTION Two component Epoxy polymer systems have been used as the basis for high performance protective coating systems since the 1950s. Numerous Epoxy resin types and ambient condition curing agents...

...Abstract Hydrogen embrittlement (HE) is a well-known phenomenon that deteriorates the mechanical properties of several metallic materials. Generally, HE susceptibility rises with increasing strength of the material. However, its effect on ductility is worse than on strength. The effects associated...

... length of 25.4 mm (1.00 inch) and diameter of 3.8 mm (0.15 inch). Tests include one test in glycerol and three tests in hydrogen-generating environment under a constant cathodic current density. RESULTS AND DISCUSSION Mechanical Properties Abstract Additively Manufactured (AM) Alloy UNS⁽¹...

.... In contrast, C and N can also be used to improve mechanical and corrosion resistance. Based on this knowledge, a high-strength austenite was developed particularly tailored for AM. The mechanical properties of the new development, determined by tensile tests, show twice as high characteristic values (yield...

...Super duplex stainless steel thermomechanical process mechanical properties pitting corrosion INTRODUCTION Abstract Super duplex stainless steels (SDSS) are characterized by a two-phase microstructure of approximately 50% ferrite (α) and 50% austenite (γ). SDSS are highly alloyed stainless...

... for an austenitic stainless steel with similar composition to UNS S20910. Therefore, at lower sensitization temperatures, the holding time is expected to be longer. Microstructure Table 2 Mechanical properties of UNS S20910 in strain hardened and solution annealed condition. Condition YS in MPa (ksi) UTS...

... Mechanical Properties Powder Solution Treatment INTRODUCTION AM brings significant benefits in better performance, inventory management, and lifecycle cost reduction to the Oil & Gas industry. Both manufacturers and users are working towards AM qualification and standardization in order to realize...