...Abstract Bridge decks exposed to de-icing agents and marine environments often deteriorate due to chloride-induced corrosion. Investigations characterizing current condition and expected future durability are critical to facilitating appropriate selection and timing of rehabilitation actions...

..., to characterize the morphology and composition of the corrosion products. The findings suggest that higher lead and chlorine content in the fuel results in a higher corrosion rate for both materials; aggravated further above 370 °C. On 16Mo3 samples, iron oxides and chlorides, and chlorine-rich compounds...

... of the water streams and characterization of the scales, metallurgical and electrochemical testing of the 316L plates in the lab under representative conditions. Results of the investigation and recommendations are discussed throughout the paper. stainless steel stress corrosion cracking chlorides plate...

...Abstract Direct electrical current (DC) is used in several ways for its healing effect in reinforced concrete structures. In long-term application, it is used for cathodic protection (CP), both in preventive and remedial mode. DC applied for a short time is used for electrochemical chloride...

... are halide concentration (more specifically chlorides), H₂S content, low pH, temperature and their combined effects. The present paper deals with the localized corrosion performance of lean duplex UNS S32202 in solutions or in atmosphere simulating pre-treatment unit environment. It is compared...

... with case studies, including the benefit of corrosion monitoring and data collection for decision making. corrosion management metals mining chlorides process & documentation leadership INTRODUCTION Due to these influences, it often takes more than a year for a new mine site to build a stable...

...Nickel base alloys with high chromium and molybdenum contents are very resistant to chloride-induced localized corrosion, even at relatively high temperatures [ 1 ]. These alloys include the Ni-Cr-Mo(W) or “C” family of alloys and the novel Ni-Mo-Cr alloy HYBRID-BC1 (UNS N10362). Alloy 22 (UNS...

... steels and it has been established that ClSCC initiates from sites of localized pitting or crevice corrosion and that ClSCC crack growth can be sustained at a chloride concentration and temperature levels significantly below those required to initiate cracking. ³ ABSTRACT Chloride-Stress...