Material selection in the chemical and petrochemical industry must consider natural variations in the process environment. This includes varying corrosion potential, pH and chloride concentration depending on process control and feedstock. Also, when trying to optimize productivity these parameters might be of interest to intentionally modify. A better understanding of how the process environment affects the passive layer formation can help make more informed material selection than classic pass/fail tests.

In this work, the protective and semiconductive properties of the passive films formed on the super austenitic steel UNS N08935 in magnesium chloride solution were investigated using potentiodynamic and potentiostatic polarizations, electrochemical impedance spectroscopy (EIS) and Mott-Schottky (MS) analysis; the passivity with varied film forming potentials, chloride concentration and solution pH were compared. All electrochemical tests revealed that the anodic potentials and solution pH had strong influence on passive films formed on UNS N08935. The protective nature of the passive film reduces as the film formation potentials increase. A more neutral solution pH or increased chloride concentration increased the transpassive potential. Moreover, GD-OES analysis confirmed the dissolution of metals in the transpassive region. The results revealed large influence of the application environment on the protectiveness of the passive film formed on UNS N08935 and indicated EIS and MS measurements are useful tools for evaluating the passive film in varied application conditions.

Subject
Transpassivation, Electrochemical impedance spectroscopy, Potential differences, Trends, Slopes, Passive films, Chloride solutions, Capacitance, Current densities, Film formation, Chlorides, Electrochemical potential, Electrode potential
Keywords:
UNS N08935, Passivity, Material selection, EIS, Mott-Schottky, Film Forming Potential, Chloride Concentration, Solution pH
© 2023 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2023
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.