Corrosion-Resistant Alloys (CRAs), among commercial Ni/Fe-Cr-Mo alloys for surface, subsea, and downhole equipment, and among traditional and proprietary cast Fe-Ni-Cr alloys for pressure pumping operations have been corrosion evaluated and ranked for their environmental resistance in two static carbon-dioxide environments with liquid brines in equilibrium. The selected CRAs were tested not only in their API Spec 6ACRA heat-treated conditions, but also after liquid nitriding, with specific attention given towards general, pitting, and crevice corrosion. All environmental tests were completed over a 30-day period in 4000psi (276bars) pressurized autoclaves at a temperature of 425°F (218°C) with either oxygen (0.5% O2) or sour gas (20% H2S). The tested CRAs were exposed to both a denser 90,000-120,000ppm NaCl-rich liquid brine, purposely supersaturated with oxygen or sour gas, and a lighter and supercritical carbon dioxide fluid containing water along with oxygen or hydrogen sulfide. For the two selected environments, the test results have revealed the following: (1) corrosion in liquid brines and supercritical fluids turned out to be comparable and rarely alarming, (2) all tested Ni/Fe-Cr-Mo wrought alloys corroded less than the cast alloys; i.e., ~0.5 to ~1.1mpy (~12 to ~28μm), (3) nitriding, while generally inconsequential to the Ni/Fe-Cr-Mo alloys, produced thin layers that corroded faster and delaminated, (4) the novel cast alloys, having a general corrosion resistance closer to the wrought Ni-Cr-Mo alloys, outperformed the traditional pump cast alloys; i.e., ~4.0 to ~40mpy (~0.1 to ~1.0mm), (5), general corrosion and pitting were the dominant corrosion mechanisms with (6) oxygen accelerating corrosion more than hydrogen sulfide. For the nitrided alloys, the progressive chemical conversion of the nitrided layer into a delaminating corrosion byproduct is proven to occur rapidly, resulting in the exposure of the base materials without noticeable accelerated corrosion over equipment lifespan.

Subject
Corrosion resistant alloys, Nickel based alloys, Molybdenum alloys, Nickel chromium molybdenum alloys, Liquids, Commercial alloys, Test environments, Fluids, Color, Brines, Carbon dioxide, Alloys, Nitriding
Keywords:
Corrosion Resistant Alloys, Supercritical Fluid, Brine, Oxygen, Sour Gas, Nitriding, Pitting
© 2022 Association for Materials Protection and Performance (AMPP). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without the prior written permission of AMPP. Positions and opinions advanced in this work are those of the author(s) and not necessarily those of AMPP. Responsibility for the content of the work lies solely with the author(s).
2022
Association for Materials Protection and Performance (AMPP)
You do not currently have access to this content.